AGFA DX-D 100 Скачать руководство пользователя страница 10

Страница: 10 / 96

DX-D 100 Mobile X-ray Unit

User Manual

0188K EN 20201116

ASSOCIATED EQUIPMENT AND SUBASSEMBLIES

According to IEC 60601--2--32, the following subassemblies are considered
Associated Equipment and conform to the applicable safety requirements
therein stated.



Unit Motion Assemblies,

that comprises:

Batteries and Charger Module

, to power the motors.

Motor Assembly

, motors and wheels.

Driving Control Assembly

, handlebar, motion controls at the

Tube-Collimator Assembly, gauges and related electronic
components.



Rotating Column and Telescopic Arm,

holding the Tube-Collimator

Assembly and allowing its positioning.

There are three Column types available:

Standard Column.

Standard Short Column (optional).

Telescopic Column (optional, only for Mobile with Wireless DR
Detector).

The Telescopic Column in parking position reduces the

height of the

DX-D 100 Mobile X-ray Unit

in order to have

complete visibility and safety when driving the system.



Collimator,

part of the Tube-Collimator Assembly:

RALCO R221/A DHHS--170E, RALCO R221/A DHHS--170D.



DR Detectors and Grids.



Holders for DR Detectors, Grids, and Accessories.

Содержание DX-D 100

































































































Результаты поиска

Содержание DX-D 100

Отзывы:

AGFA DX-D 100, Руководство пользователя, Страница: 10 / 96

Результаты поиска

Содержание DX-D 100

Отзывы: