AGFA DRYSTAR 5302 100, Руководство по обслуживанию

Страница: 393 / 465

DD+DIS149.05E
Maintenance
Printed copies of this document are not controlled.
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0 DRYSTAR 5302 Chapter 9 / 3
2 Introduction
The maintenance steps described in this document are based on the
technically required measures to guarantee the proper operation of the
printer.
The maintenance points have been arranged in a chronologically suitable
order to make the work routines as efficient as possible. The sequence of the
maintenance points in the checklist (see appendix) is identical with the
maintenance instructions.
Additional maintenance steps can be required according to national
regulations .
2.1 Maintenance frequency
The maintenance has to be carried out:
•
every 25.000 printed films, or
•
every 12 months, whichever comes first.
2.2 Required time
•
Time required for the maintenance:
≤
2 hours,
2.3 Required tools
2005-09-09 (Type 5366/100) Agfa Company Confidential
Description Order Number / Comment
Calibrated densitometer recommended types are
•
MacBeth TR-924
•
X-Rite 301
•
X-Rite 310
•
X-Rite 331
•
X-Rite 341
•
Gretag D200-2
Flash light commercially available
Loop 8x CM+9.9579.9904.0
Service PC with Drystar 5302 Density For Service PC specifications refer to
Reproduction Check files
chapter 3.2, Tools.
Density reproduction check files are
available via MEDNET, GSO Library
Waterproof pen commercially available
Wrist strap CM+9.9999.0830.0