AGFA DRYSTAR 5302 100, Руководство по обслуживанию

Страница: 28 / 465

DD+DIS238.06E
Generic Safety Directions
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5 Generic Safety Directions for HealthCare Imaging Products Page 26 of 30
Performing the electrical test according to national regulations after repair work:
WARNING:
Improper ground connections or too high leakage current may lead to electric
shocks.

After any repair work which may influence electrical safety of the product, inform the
responsible organization* about the necessity of the electrical test according to
national regulations.
If specific national regulations do not exist: It is recommended to perform the
electrical test according to IEC 62353.

Make sure, that all grounding connections are present.
*Responsible Organization:
Entity accountable for the use and maintenance of a medical equipment or a medical equipment system. The
accountable entity can be, for example, a hospital or an individual clinician.
NOTE:
Refer to the Agfa HealthCare Library for system specific IEC 62353 test documents.
Performing service activities at devices emitting laser radiation:
WARNING:
Laser radiation. Eye injury possible.
INSTRUCTION:

Strictly observe the warning notes in the service manual of devices emitting laser
radiation (See service manual chapter describing Safety Guidelines / General
Repair Instructions) and at the corresponding steps of instructions.

Strictly observe the warning labels at the modules emitting laser light. For the
meaning of the labels refer to section 3.3 in this document.

Do not look into the laser beam.

Do not open modules containing a laser. Only open modules containing a laser if
explicitly instructed to do so.

Do not keep tools in the laser beam unless explicitly instructed to do so.

Make yourself familiar with the path of the laser light and the conditions, when the
laser beam is switched on. Refer to the functional description in the corresponding
service manual.

Do not operate modules with laser outside the device.
04-2014
Agfa Company Confidential