AGFA DRYSTAR 5302 100, Руководство по обслуживанию

Страница: 275 / 465

DD+DIS150
Repair and Service
.05E Adjustments and Calibrations
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 DRYSTAR 5302 Chapter 3.6 / 33
05-2009 Type 5366/100
Agfa Company Confidential
Okay. No
replacement
required
Okay. No
replacement
required.
Replace TH.
Replace TH.
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes or in doubt
536736mm.cdr
Additional
vertical stripes
visible ?
Resistor Check okay ?
Vertical
stripes visible ?
Stripes visible in
medical_image test
image ?
Previous Stripes
still visible ?
TH cleaning
procedure
Print STI2 and
medicalimage test image.
Print STI2 test image.
*
*
Perform Dry TH
Cleaning Procedure.
Clean TH with
Isopropyl alcohol
(”wet” cleaning).
Vertical stripes
visible ?
Perform Resistor Check.
Perform TH
profile calibration.
Dry TH cleaning
procedure
Dismount TH.
Mount TH.
Use ink eraser
for cleaning.
Refer to figure next page.
Print STI2 test image.
New vertical
stripes visible ?
No
**
***
*
* Service Engineer Tools - Enter Service Command Session -
3 Print Testimage – 1 Test image - STI2.ZIP
*** Service Engineer Tools - Enter Service Command session
select '6. Calibration - 3. Print Head Calibration
** Browser service menu- 7 Test & Diagnose –
6 Diagnose mechanics – 5 Print Head Unit – 3 Resistor Check
Clean TH with
Isopropyl alcohol
(”wet” cleaning).
Clean TH with
Isopropyl alcohol
(”wet” cleaning).
Clean TH with
Isopropyl alcohol
(”wet” cleaning).
Okay. No
replacement
required.
Okay. No
replacement
required.
IMPORTANT:
Observe TH cleaning rules
described next page.
Figure 20