AGCO Challenger RoGator 635, Руководство по обслуживанию

Страница: 34 / 41

Safety
1-26 632154-1
AVOID HEATING NEAR PRESSURIZED
FLUID LINES
FIG. 65: Never heat by welding, soldering or using a
torch near pressurized fluid lines or other flammable
materials.
Pressurized lines can be accidentally cut when heat
goes beyond immediate flame area.
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to
personnel and bystanders.
SERVICE COOLING SYSTEM
PROPERLY
FIG. 66: Explosive release of fluids from pressurized
cooling systems can cause serious burns.
Shut engine off. Remove filler cap only when it is cool
enough to touch with bare hands. Slowly loosen filler
cap to first stop to relieve any pressure before removing
cap completely.
REMOVE PAINT BEFORE WELDING OR
HEATING
FIG. 67: Avoid potentially toxic fumes and dust.
Hazardous fumes are generated when paint is heated
by welding, soldering or using a torch.
Always remove paint before welding or heating. Wear
an approved respirator to sand or grind paint, avoid
breathing dust.
If using solvent or paint stripper, remove stripper with
soap and water before welding. Remove solvent or
paint stripper screens and other flammable material
from area. Allow fumes to disperse before welding or
heating.
Always work outside or in a well-ventilated area.
Dispose of paint and solvent properly.
FIG. 65
0026
FIG. 66
0024
FIG. 67
0023