8
Attaching the water bottle
Remove the lid from the water bottle. Position the bottle
so that the gas tube protrudes into the water and then
push the bottle up as far as it will go. Turn the bottle as
shown in the illustration until you feel it engage. Make
sure that the water bottle is firmly in place before use.
Carbonating water
Important!
Never carbonate anything other than pure drinking water, as sugar
or other additives might cause the pressure relief valves to stick, rendering the
machine unsafe to use.
The degree of carbonation is a matter of personal taste,
so for the first few times you use the machine, you
will have to experiment until you find the degree of
carbonation that is right for you.
To carbonate the water, press the button and keep it
pressed for 3–4 seconds or until you hear a hiss as the
pressure relief valve opens. Depending on the water
temperature, this will give you a normal degree of
carbonation.
You can add more gas as desired by pressing the button again briefly once or twice.
Release the button and wait until you hear another hiss as any excess pressure is
discharged and the water bottle is vented.
Unscrew the water bottle and enjoy your carbonated water. Store the water in a cool
place with the lid tightly screwed on to prevent the water going flat.
O54504_A6_AGA_Exclusive_manual.indd 8
2017-11-09 14:24
