6
Using the sparkling water maker
Your new sparkling water maker enables you to carbonate your own water, which you
can then flavour with AGA concentrates. To carbonate your own water, you need the
AGA 425 g carbon dioxide gas cylinder. When the cylinder is empty, a replacement
can be bought from the store where you made your original purchase and the old
bottle returned for deposit.
Inserting the gas cylinder
Remove the seal and the protective cap from the cylinder. Keep the cap in a safe
place as it will be needed when you replace the cylinder when empty. Place the
sparkling water maker on a flat surface and remove the back section by pressing the
button on the back and pushing the back section first up and then out.
Tilt the sparkling water maker forwards and insert the gas cylinder through the
opening in the bottom of the machine so that the cylinder is standing on the work
surface. Gently tilt the sparkling water maker back so that the upper part of the
machine rests against the threaded neck of the cylinder.
Screw the cylinder into the machine as far as
it will go (see illustration), at which point the
sparkling water maker will have returned to its
original resting position. Make sure that the
cylinder is firmly in place.
Slide the back section back into its guide
grooves and push it down until the locking
mechanism clicks back into place.
O54504_A6_AGA_Exclusive_manual.indd 6
2017-11-09 14:24
