AGA marvel AMPROFD20 Скачать руководство пользователя

Страница: 14 / 32

Interior Water Filtration System

Model UKF8001AXX-200 Capacity 200 Gallons (757 Liters)

This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances listed below. The

concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the

permissible limit for water leaving the system, as spec ed in NSF/ANSI Standards 42 and 53.

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0. 55 gpm (2.08 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F ±

5°F (20°C ± 3°C).

It is essential that operational, maintenance, and ter

replacement requirements be carried out for the product to

perform as advertised.
The disposable water

should be replaced at least every

6 months.
The

r monitor system measures the amount of water that

passes through the

and alerts you to replace the

When 90% of the

’s rated life is used, the yellow (Order)

light comes on. When 10

lter’s rated life is used, the

red (Replace) light comes on, and it is recommended that you

replace the

r. For models

lter status lights,

replace the

every 6

The product is for cold water use only.
Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after

the system. Systems cert

for cyst reduction may be used

on disinfected waters that may contain terable cysts.

Refer to the “Water Filtration System” section for the

Manufacturer’s name and telephone number.
Refer to the “Warranty” section for the Manufacturer’s limited

warranty.

Application Guidelines/W

ater Supply Parameters

System tested and cert

by NSF International against NSF/ANSI Standard 42 for the reduction of

Chlorine Taste and Odor, Particulate Class I*; and against NSF/ANSI Standard 53 for the reduction of

Lead, Mercury, Atrazine, Benzene, p-Dichlorobenzene, Carbofuran, Toxaphene, Cysts, Turbidity,

Asbestos, O-Dichlorobenzene, Ethylbenzene, Chlorobenzene, Endrin, Tetrachloroethylene and Lindane.

Substance Reduction

ects

NSF Reduction

Requirements

Average

ent Challenge

Concentration

Maximum

Average

Minimum%

Reduction

Average%

Reduction

Chlorine Taste/Odor

Particulate Class I

50% reduction

85% reduction

2.00 mg/L

14,000,000 #/mL

2.0 mg/L ± 10%

At least 10,000

particles/mL

0.06 mg/L

370,000 #/mL

0.050625 mg/L

196,666 #/mL

97.00%

97.40%

97.52%

99.00%

Contaminant

Reduction

NSF Reduction

Requirements

Average

Concentration

Maximum

Average

Minimum%

Reduction

Average%

Reduction

Lead: @ pH 6.5

Lead: @ pH 8.5

0.010 mg/L

0.150 mg/L

†

0.150 mg/L

†

0.15 mg/L ± 10%

< 0.001 mg/L

>99.30%

Mercury: @ pH 6.5

Mercury: @ pH 8.5

0.002 mg/L

0.006 mg/L

0.0059 mg/L

0.006 mg/L ± 10%

0.0005 mg/L

0.0018 mg/L

0.0003 mg/L

0.00073 mg/L

91.70%

69.20%

95.00%

88.10%

Benzene

0.005 mg/L

0.0133 mg/L

0.015 mg/L ± 10%

0.0005 mg/L

96.10%

96.30%

p-Dichlorobenzene

0.075 mg/L

0.210 mg/L

0.225 mg/L ± 10%

< 0.0005 mg/L

>99.80%

Carbofuran

0.040 mg/L

0.0753 mg/L

0.08 mg/L ± 10%

0.027 mg/L

0.008 mg/L

64.60%

73.45%

Toxaphene

0.003 mg/L

0.015 mg/L

0.015 ± 10 %

< 0.001 mg/L

>93.3%

Atrazine

0.003 mg/L

0.0102 mg/L

0.009 mg/L ± 10%

0.0027 mg/L

0.00105 mg/L

76.30%

89.40%

Asbestos

>99%

126.5 MF/L

to 10

††

< 0.17 MF/L

>99.99%

Live Cysts

‡

Turbidity

>99.95%

0.5 NTU

122,500 #/L

10.5 NTU

50,000/L min.

11 ± 1 NTU

< 1 #/L

‡

0.30 NTU

< 1 #/L

‡

0.125 NTU

>99.99%

97.30%

>99.99%

98.80%

Lindane

0.0002 mg/L

0.0019 mg/L

0.002 ± 10%

< 0.00016 mg/L

0.000035 mg/L

91.80%

97.90%

Tetrachloroethylene

0.005 mg/L

0.015 mg/L

0.015 mg/L ± 10%

< 0.0005 mg/L

>96.6%

O-Dichlorobenzene

0.6 mg/L

1.7 mg/L

1.8 mg/L ± 10%

< 0.5 mg/L

>99.9%

Ethylbenzene

0.7 mg/L

2.2 mg/L

2.1 mg/L ± 10%

0.0048 mg/L

0.11 mg/L

99.80%

99.90%

Chlorobenzene

0.1 mg/L

2.0 mg/L

2.0 mg/L ± 10%

0.0038 mg/L

0.0008 mg/L

99.80%

99.90%

Endrin

0.002 mg/L

0.007 mg/L

0.006 mg/L ± 10%

0.0004 mg/L

0.0002 mg/L

94.30%

96.80%

Water Supply

Water Pressure

Water Temperature

Service Flow Rate

City or Well

35 - 120 psi (241 - 827 kPa)

33° - 100°F (1° - 38°C)

0.55 gpm (2.08 L/min.) @ 60 psi

†

††

‡

Class I particle size: >0.5 to <1 um
Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
These contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.
Fibers greater than 10 um in length
Based on the use of Cryptosporidium parvum oocysts

® NSF is a registered trademark of NSF International.

part number 31104.