7
Door Closing and Door Alignment
The base grille covers the leveling screws and roller assemblies
located at the bottom of the refrigerator cabinet below the freezer
door or drawer. Before making adjustments, remove the base
grille and move the refrigerator to its nal location.
1.
Remove the base grille. Grasp the grille rmly and pull it
toward you.
2.
Move the refrigerator to its nal location.
NOTE:
To allow the refrigerator to roll easier, raise the leveling
legs o the oor by turning the leveling screws
counterclockwise. The front rollers will be touching the
r.
3.
So the doors will close easier, use a
¹⁄
" hex driver to turn both
leveling screws clockwise. This will raise the front of the
refrigerator tilting it slightly downward to the rear. Turn both
leveling screws the same amount.
NOTE:
Having someone push against the top of the
refrigerator takes some weight
o the leveling screws. This
makes it easier to turn the screws.
4.
Open and close the doors to make sure they close as easily as
you like. If not, increase the tilt by turning both leveling screws
clockwise. It may take several turns of the leveling screw to
allow the doors to close easier.
5.
Check for door alignment. If one door is lower than the other,
adjust the leveling screw, on the lower side of the refrigerator.
Using a
¹⁄
" hex driver, turn the screw clockwise to raise that
side of the refrigerator until the doors are aligned. It may take
several turns of the leveling screw to raise the refrigerator.
NOTE:
Having someone push against the top of the
refrigerator takes some weight
o the leveling screws. This
makes it easier to turn the screws.
6.
Make sure the refrigerator is steady. If the refrigerator seems
unsteady or rolls forward when the door or drawer is opened
adjust the leveling screws. Using a
¹⁄
" hex driver, turn the
leveling screw on each side clockwise until the rollers are up
and the leveling feet are rmly against the or.
NOTE:
Having someone push against the top of the
refrigerator takes some weight
o the leveling screws. This
makes it easier to turn the screws.
7.
Replace the base grille by aligning the ends of the grille with
the leveling assemblies on each side and snapping the grille
into place.
REFRIGERATOR USE
Opening and Closing Doors
There are two refrigerator compartment doors. The doors can be
opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
When the left side door is opened, the hinged seal
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically
forms a seal between the two doors.
A. Leveling screw
A
"
A. Hinged seal
"
A
Содержание AMPROFD20
Страница 16: ...16...
