AG SHIELD LandRoller Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 55

AG SHIELD LandRoller Скачать руководство пользователя страница 7

7

3. SAFETY

SAFETY ALERT SYMBOL

This Safety Alert symbol means:

ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!

The Safety Alert symbol identifies important
safety messages on the Ag Shield Recon 300
and in the manual. When you see this symbol,
be alert to the possibility of personal injury or
death. Follow the instructions in the safety
message.

Accidents Disable and Kill

3 Big Reasons

Accidents Cost

Accidents Can Be Avoided

SIGNAL WORDS:

Note the use of the signal words

DANGER, WARNING

and

CAUTION

with the safety messages. The

appropriate signal word for each message has been
selected using the following guide-lines:

DANGER

-

Indicates an imminently hazardous

situation that, if not avoided, will result
in death or serious injury. This signal
word is to be limited to the most
extreme situations typically for machine
components, which for functional
purposes, cannot be guarded.

WARNING -

Indicates a potentially hazardous

situation that, if not avoided, could
result in death or serious injury, and
includes hazards that are exposed
when guards are removed. It may also
be used to alert against unsafe
practices.

CAUTION -

Indicates a potentially hazardous
situation that, if not avoided, could
result in minor injury. It may also be
used to alert against unsafe practices.

«
...
5
6
7
8
9
...
»

Содержание LandRoller
























































Отзывы:

Нет отзывов