AG Neovo X-Series, Руководство пользователя

Страница: 22 / 29

21
Warning Messages and Troubleshooting
Warning Messages
If the message appears on the screen Check the items
CAN NOT DISPLAY THIS INPUT SIGNAL The input signal is not acceptable by the monitor.
•
Please check the video resolution and frequency
range is within that specified for the monitor.
•
Please refer to the “Technical Specifications”
section of this user manual for details.
NO SIGNAL INPUT No signal inputs are detected from any one of the
input connectors.
Check that the power switch of your computer or
video source is in the “ON” position.
•
Check that the signal cable is connected
properly.
•
Ensure that no pins are bent or pushed in the
connectors of signal cable.
NO VIDEO SIGNAL FROM ANALOG INPUT No signal input is detected from ANALOG port.
Check that the power switch of your computer is in
the “ON” position.
•
Check that the D-Sub 15-pin signal cable is
connected properly to ANALOG port at the rear
of monitor.
•
Check that the D-Sub 15-pin signal cable is
connected properly to the computer.
Ensure that no pins are bent or pushed in the
connectors of D-Sub 15-pin cable.
NO VIDEO SIGNAL FROM DIGITAL INPUT No signal input is detected from DIGITAL port.
Check that the power switch of your computer is in
the “ON” position.
•
Check that the DVI signal cable is connected
properly to DIGITAL port at the rear of monitor.
•
Check that the DVI signal cable is connected
properly to the computer.
•
Ensure that no pins are bent or pushed in the
connectors of DVI cable.
NO VIDEO SIGNAL FROM S-VIDEO-IN No signal input is detected from S-VIDEO port.
Check that the power switch of your video source is
in the “ON” position.