The 17” monitor weighs approximately 7.57 kg(16.11lb), and is installed
by the following steps:
1.
Retract the base stand. (Refer to the section “Retracting the base
stand” before doing so).
2.
The 17” monitor is supplied
with two stud bolts. First
tighten these two bolts on the
rear housing of the monitor.
3.
There are two holes on the
rear housing and two holes
for M4 screws on the base
stand which comply with the
installation interface standard
for a VESA Flat Panel Display
(FPD) of 100*100mm
。
AG Neovo wall-mountable products (wall mount kit, WMK series) are
recommended.
7
