10
PRODUCT DESCRIPTION
1.2 Preparing for the Installation
• Due to the high power consumption, always use the plug
exclusively designed for this product. If an extended line is
required, please consult your service agent.
•
The product should be installed on a at surface to avoid tipping.
The distance between the back of the product and the wall should
be maintained for proper ventilation. Avoid installing the product in
the kitchen, bathroom or any other places with high humidity so as
not to shorten the service life of the electronic components.
• The product can normally operate only under 5000m in altitude. In
installations at altitudes above 3000m, some abnormalities may be
experienced.
1.3 Moving the Display
1.3.1 Unpacking the Display
Before unpacking the display prepare a at and stable surface near a
wall outlet. Set the product box in an upright position according to the
arrow markings on the outside of the product box.
1
Detach the four locks.
2
Open the product box from the top of the box.
3
Take the accessories out and remove the top cushion.
4
Hold the display by the carrying handles firmly with two
people to remove the display from the box.
Do not grasp the display by the screen.
POWER
F1
F2
F3
F4
MUSIC
2
MOVIE
3
PHOTO
1
ROTATE
5
16:9/4:3
4
ENTER
MENU
MUTE
SLIDE SHOW
SOURCE
EXIT
6
OSD
8
ZOOM
7
9
BACKMUSIC
0
VOL
Lock
Warning:
♦
Do not press too hard on the
LCD panel or edge of the
frame, as this may cause the
device to malfunction.
♦
During unpacking, make sure
to hold the carrying handles
to remove the device from its
packaging.
