12
©Copyright LOTRONIC 2018
7.
And so on, you could adjust the volume and fan speed;
1.
Setting DMX mode and DMX address by function buttons (figure 1-E) under
the LCD display, DMX operation has not started at this time;
4.
Connect the DMX 512 controller cable to the input socket (figure 1-G or I)
of the machine unit. Make sure the signal cable polarity is correct. When
DMX socket receives effective DMX signals, the machine enter DMX control
mode automatically, other built-in functions invalid;
Duration: 6s
____ IDLE ____
DMX Mode: 1ch
____ IDLE ____
DMX Address: 2
____ IDLE ____
XXXXXXXXXX
____ IDLE ____
XXXXXXXXXX
____ IDLE ____
XXXXXXXXXX
Vxxx Fxxx Ixxx Dxxx
5.
2.
3.
8.
9.
6.
Press “Up” or “Down” to adjust time value of
duration (5s - 250s);
Press MENU enter to DMX mode, press Up or
Down button to set the DMX Mode, there are 3
DMX modes for choice:1CH, 2CH, 4CH;
Press MENU enter to DMX address, press Up or
Down button to set the DMX address;
After the Self-cleaning process is complete, IDLE
will stop blinking.
Press again START/STOP to stop Timing fogging.
Please note the machine design of machine
stops working after a delay of 30 seconds,
automatically clear the tubing of the remaining
liquid, at this point, IDLE will blink;
After setting the interval and duration, press
START/STOP to start timing fogging, the main
display information as shown on the left;
•
If the interval is set to a nonzero value (5s-250s), the timer is started.
•
When executing timing fogging, if the interval is set to zero, will
automatically be converted to continuous fogging.
DMX Control Operation
