11
©Copyright LOTRONIC 2018
XXXXXXXXXX
Vol=xxx Fan=xxx
Interval: 6s
____ IDLE ____
Fan Power: 5
____ IDLE ____
XXXXXXXXXX
____ IDLE ____
XXXXXXXXXX
____ IDLE ____
2.
Press MENU to enter to Interval;
4.
Press again MENU to switch to adjust the value of duration, please note
timing fogging still stops at the same moment;
Panel control, DMX signal is not connected.
1.
3.
5.
6.
7.
Under this status, press MENU to get into timing
setting, please note timing fogging stops at the
same moment;
The first line is the setting state, usually shows
the last setting in the last operation, such as
DMX, Address, or Volume, or Fan, Power, and
so on, the following will be replaced by XXXXX.
The second line shows the real-time working
state.
Press “Up” or “Down” to adjust the value of
interval (0s or 5s - 250s);
Press “Up” or “Down” to adjust fan speed (5
-100%), press MENU to switch Volume and Fan
Power;
Press again START/STOP to stop Continuous
fogging. Please note the machine design of
machine stops working after a delay of 30
seconds, automatically clear the tubing of the
remaining liquid, at this point, IDLE will blink;
After the Self-cleaning process is complete, IDLE
will stop blinking.
Timing Fogging Operation
•
When executing continuous fogging, interval value must be zero, if the
interval value change to 5-250 will automatically be converted to timing
fogging.
