©Copyright Lotronic 2018
PARLED100-Z
6
Dimmer mode 1
Dimmer mode 2 Dimmer mode 3
Dimmer mode 4
Optically Linear
Square Law
Inverse-Square Law S-Curve
Mode 1(Optically Linear): The increase in light intensity appears to be linear as DMX value is increased.
Mode 2(Square Law): Light intensity control is finer at low levels and coarser at high levels.
Mode 3(Inverse Square Law): Light intensity control is coarser at low levels and finer at high levels.
Mode 4(S-curve):
Light intensity control is finer at low levels and high levels and coarser at medium levels.
Dimmer Speed
Select
, press the
ENTER
button. Use the
DOWN
and
UP
button to select
(Fast) or
(Smooth). Once selected, press the
ENTER
button to setup or exit menu mode without any change after 8 seconds. Back to
the functions without any change press the
MENU
button again.
DMX State
Select
, press the
ENTER
button. Use the
DOWN
and
UP
button to select
(Blackout) or
(Hold the last state) . Once selected, press the
ENTER
button to setup or exit menu mode without any change after 8 seconds.
Back to the functions without any change press the
MENU
button again.
DISPLAY INVERSE
To select
Disp
, press the ENTER button to show the DISPLAY on the display. Use the DOWN/UP button to select
(normal) or
(inversion), press ENTER button to setup. Back to the functions without any change
press MENU button.
Select
, press the
ENTER
button. Use the
DOWN
and
UP
button to select
the brightness (d000-d100)or
strobe(S000-S100). Once selected, press the
ENTER
button to setup or exit menu mode without any change after
8 seconds automatically. Back to the functions without any change press the
MENU
button again.
