EN
4
© Copyright LOTRONIC 2020
IMPORTANT NOTES ON CHARGING LITHIUM-ION BATTERIES
1.
PRIOR to using the unit for the first time, please charge fully the battery
2. Charge the battery regularly after each use.
Don't wait until it is discharged!
3.
DON'T allow the battery to discharge completely,
otherwise it will lose 20% of its capacity
or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered
anymore and it will become impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of
its capacity and check/charge it once per month.
The life time of the battery depends on the observance of these recommendations.
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
We cannot be held responsible for damaged batteries further to the non-observance of
these basic rules.
RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste
but deposited in separate collection points for recycling.
ATTENTION:
Danger of explosion if battery is incorrectly placed. Only replace by the same or equiv
-
alent type.
INSTALLATION
Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always
ensure that the structure to which you are attaching the unit is secure and able to support a weight
of 10 times of the unit’s weight (i.e. 10 x 3.7kg = 37kg).
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.
Never stand directly below the device when mounting, removing or servicing the fixture.
ORIENTATION
The fixture must never be mounted for a possible swinging position.
RIGGING
The fixture can be mounted in several orientations.
The fixture can be placed on an even and solid floor and work as an uplight.
It also has a built-in adjustable tilt support. By pushing the tilt support, the
fixture can tilt up to 25 degrees to illuminate walls or facades.
Make sure that the fixture is always placed on even and strong surface, and
keep it 0.5m away from projection objects.
The fixture has a M10 threaded hole for rigging, and can be mounted on a
truss.
When installing the fixture to a crossbar or truss, always use an extra safety
cord (not supplied with the fixture). Users also need to make sure the cross
-
bar is stable or not moving, and can support a weight of 37 kg.
For the rest of safety installation, please always respect your local regula
-
tions.
FEATURES
• 5x 12W RGBWA-UV LEDs (6 in 1)
• Powered via the mains or the built-in rechargeable Lithium battery
• Wireless Solution compatible 2.4GHz DMX transceiver
• Bottom-mounted dock for easy charging of the battery via the optional flight case
• Overload protection of the battery
