afx light 16-2088, Руководство пользователя

Страница: 15 / 28

EN 15
www.afx-light.com
POWER LINK
Connect an IEC cable from the POWER OUT connector of the 1st unit to the POWER IN connector of
the second unit, etc.
CONTROL PANEL (FIG. 2)
To access the main menu press the MENU button. Press the UP or DOWN buttons until you reach
function you wish to change. When you reach the function you wish to change, press the ENTER
button. When a function is selected, use the UP or DOWN buttons to change the function settings.
Once your changes are made, press the ENTER button.
Tip: Press UP & DOWN buttons at the same time for 3 seconds. The display will reverse.
FUNCTION MENU
MENU DESCRIPTION
Operating
Mode
DMX address A001-AXXX DMX address setting
Channel Mode
CH112 standard mode
CH30 Vector mode
CH24 Extended mode
Auto run
Internal program 1-8
Auto run State: Master/Alone
Auto run (On/off)
Music control
Internal program 1-8
Sound control State: Master/Alone
Music run (On/off)
Option
Reset Default Yes/No Reset default
Signal set Wired DMX Wired DMX
Pan/Tilt
Reverse Pan (on/off)
Reverse Tilt (on/off)
Select Pan 630/540/360
Select Tilt 270/180/90 Reverse Pan
Reverse Tilt
Select Pan
Select Tilt
UI SET
Mic sensitivity 0-99%
OFF signal mode (On/Off)
Totem mode OFF/CEN./R/L
Mic sensitivity
Off at original status and ON
at reset status
Totem mode: Centre/Right/
Left (défault:Off)
Information
Temperature XXX°C/°F Current temperature
Software ver -
sion
V1.0 - V9.9 Software version
Manual
control
Reset
Total reset
Pan/Tilt reset
Zoom Reset Reset All
Seset Pan/Tilt
Reset Zoom
Channel PAN=XXX... Channel control
Advanced
Access code
0888)
Calibration PAN=XXX... Calibration