© Copyright LOTRONIC 2015 MINIBEAM32
Page 5
The connection between the output of master and input of product, it’s available to use the 3 pins XLR cable which
provided by the manufacturer. Signal cable from the DMX output of the controller to the input of the first master light,
and connect to the DMX input of second slave light from the DMX output of the first master light, analogously, till
connected all the slave lights, and insert the last connector to the output of the final light. (Notice: the diameter of
core of every cable should be 0.5mm at least, double core shelter cable should be used).The signal connecting must
use the attached 3 pins XLR cable. Notice, all the internal lead wire of the 3 pins XLR cable should not touch to each
other or connect to the connector.
DMX signal terminator is recommended on the last unit of the chain. DMX terminator is a XLR connector with a
120
Ω
resistor between the pin 2 and pin 3 of the XLR connector
Features
Channel: 13 channels, DMX512
Pan scan: 540° (16 bit)
Tilt scan: 240° (16 bit)
LCD display
OPERATION
Address : To choose the DMX address of the device when the operating mode is DMX
Workmod : To choose the operating mode of the device : DMX, Auto or sound
Pt sett : Pan setting, Tilt setting and PAN /Tilt reverse ( Yes or No )
Control : Manual control of all the DMX channel
Reset : To do a reset ( Yes or No )
MASTER-SLAVE OPERATING MODE
Please set the master moving head in Auto or sound mode
Then set a slave unit(s) in DMX mode ( address 001 )
Like that, the slave unit(s) will reproduce move and effects of the master unit
DMX CHANNEL TABLE
13 DMX CHANNELS
CHANNEL
FUNCTION
DMX VALUE
DESCRIPTION
CH1
PAN
0-19
20-49
50-64
65-69
70-87
85-89
90-104
105-109
110-124
125-129
130-144
145-149
150-164
165-169
170-184
185-189
Shutter closed
Shutter open
Strobe 1 ( fast to slow )
Shutter open
Strobe 2 (opening pulse ) ( fast to slow )
Shutter open
Strobe 3 (closing pulse ) ( fast to slow )
Shutter open
Strobe 4 (random strobe ) ( fast to slow )
Shutter open
Strobe 5 (random opening pulse ) ( fast to slow )
Shutter open
Strobe 6 (random closing pulse ) ( fast to slow )
Shutter open
Strobe 7 (burst pulse ) ( fast to slow )
Shutter open
