14
Mounting
EN
Unitop
5.3
Mounting the line
If no connection thread is available on the tank, several lines can be con-
nected via the combination fitting "Euroflex 3" to a single G1 connection
thread.
1. Mount the vertical line in the tank in such a way that the lower end of the
vertical line is approximately 20 mm above the lowest point of the tank bot-
tom.
2. Install the measuring line with a steady gradient towards the tank, avoid
bends.
3. Push the screw connection onto the measuring line.
A. Unitop
B. Measuring line
C. Standpipe
D. Condensate trap
A
C
B
D
