Afore AF3.6K-DH, Инструкция по установке и эксплуатации

Страница: 42 / 52

４１
C05 GridOverVoltFault Grid voltage over
1. The inverter will restart
automatically when the grid three
phase return to normal.
2. Contact with local distributor or
required grid company adjust
voltage protection parameters.
C06 GridUnderVoltFault Grid voltage under
C07 GridLineOverVoltFault Grid line voltage over
C08 GridLineUnderVoltFault
Grid line voltage
under
C09 GridOverFreqFault Grid Frequency over
1. The inverter will restart
automatically when the grid three
phase return to normal.
2. Contact with local distributor or
required grid company adjust
frequency protection parameters.
C10 GridUnderFreqFault Grid Frequency under
Off-grid Fault
D01 UpsOverPowerFault 0ff-grid load over
1. Reduce loads.
2. If sometimes overload, it can be
ignored, when generation power
enough can be recovery.
3. If those faults occurs continuously
and frequently, please ask help for
local distributors.
D02 GridConflictFault
Grid connected to
Back-up terminal
1. Check the off-grid port
connection correct, disconnect both
off-grid and grid ports.
D03 GenOverVoltFault
Generator voltage
over
1. Adjust generator running
parameters, make the output
voltage, frequency in allowed range.
2. If this fault occurs continuously
and frequently, please ask help for
local distributors.
D04 GenUnderVoltFault
Generator voltage
under
D05 GenOverFreqFault
Generator over
frequency
D06 GenUnderFreqFault
Generator under
frequency
DC Fault
E01 Pv1HwOverCurrFault
PV current over,
triggered by
hardware protection
circuit
1. Power off, then restart (Ref.
Chapter8).
2. If those faults
occurs
continuously and frequently, please
ask help for local distributors.
E02 Pv2HwOverCurrFault
E03 Pv3HwOverCurrFault
E04 -
E05 -
E06 -
E07 -
E08 -
E09 -
E10 -