8
OPERATING INSTRUCTIONS
：
Control Panel:
Master Power Switch (A)
Open the cover and push button A down (I) to “ON” position.
ON/OFF(B)
Press button B(ON/OFF) to begin the flame effect.
Default interface displays as following:
Two short beeps that increase in pitch sound when switched on and three
beeps that decrease in pitch sound when switched off.
When switches on, the heating level, set temperature and clock icon are
displayed. The display will be disappeared after 60 second without any
operation. Press any button to display again.
Locking the Buttons(C)
Press and hold button C(OK) for more than 6 seconds to lock or unlock the
buttons, LOC is displayed and indicated that the buttons are locked. Once it’s
locked LOC will be flashing for 6 seconds then disappear, press any button
LOC will flash again. Long press button C(OK) for 6 seconds to unlock the
buttons.
Please note the button B(ON/OFF) is never locked.
A
B
C
D
E
F
The heating icon will display and start heating when the room
temperature is less than the default setting (10°C), on the contrary it
will not display and heat.
The clock icon will be flashing because the time is not set yet.
Please follow the steps in “Time Setting” to set the time.
www.aflamo.pl/en/
