15
Transferring Results to a PC via USB
To transfer files from your FlexScan to a PC using a USB cable, perform the following:
•
Connect your FlexScan to a PC using the supplied micro-USB to USB cable. Make sure the micro-plug is fully seated in your FlexScan.
•
Touch the USB soft key on the Results Scree.
•
On your PC, open My Computer. A new removable drive named TS100 X: will appear, where ‘X:’ is the drive letter assigned to your FlexScan.
•
Under TS100 X: you should see two folders: RESULTS and SOFTWARE.
•
Copy the RESULTS folder to your PC.
–
Under RESULTS you will see: TRACES.
–
Under TRACES you will see all of the folders containing test results.
Note:
Before removing the USB cable connecting your FlexScan to your PC, or pressing the Cancel soft key on the USB screen, left click the Safely Remove
Hardware icon in the Start bar of your PC, then left click the Safely remove USB Mass Storage Device – Drive (X:) message, where ‘X’ is the drive
letter assigned to your FlexScan.
