Afikim afiscooter-s, Руководство по обслуживанию

Страница: 14 / 37

Service Manual AFISCOOTER S v.1.9
Ver. 01
14
4.4 Fault display:
When there is a fault the comment pops up on the screen.
Fault table on page 24 Section 12.4
In a situation that the potentiometer is pressed when turn on the scooter, a
signal c will appear in the status line. When this condition is detected, the last
condition of the batteries must be displayed before the shutdown, until the
potentiometer is released and returned to normal operation. The numeric
display will show a running animation of the digit '0' from left to right on all five
digits in the display in a cyclic manner, 120mSec per digit until the
potentiometer is released and beyond signal a. This animation will be
displayed in both modes of parameter 7.
5. Display the software version burned on the LCD:
Activating the tool using the key switch, when the Mode button is pressed, will
display the software version number for about 3 seconds, and then switch to normal
working mode.
2 - 12 hours
0- Off.
1-5 - Scale of Power.
(Default - 5)
Daytime running
backlight
(headlight off)
P 05
0- Off.
1-5 - Scale of Power.
(Default - 2)
Night running
backlight
(headlight on)
P 06
1- From the S-Drive status line. (Default)
2- According to a calculation from the
algorithm in the card.
Battery display
from the status
line / algorithm on
the board .
P 07
1 - Fault code is displayed in
alphanumeric view (default).
2 - Fault code is displayed in the
exclamation mark (flashing).
Status indicator P 08
Reset the parameters to default.
Reset the display
parameters
Cr