Afikim afiscooter-s, Руководство по обслуживанию

Страница: 12 / 37

Service Manual AFISCOOTER S v.1.9
Ver. 01
12
Push buttons:
Right
– Mode
: Use to change between different display modes and to Reset
the Distance and Time.
Left- Setup : Use to adjust the clock. As well as on and off the display lighting.
Internal LED : Can be seen only from the bottom side of the LCD board. When
LCD board active
– flashes to indicate OK, constantly on in charge mode.
2. Speed reading:
This is done with the help of a magnetic sensor located on the right wheel axle.
The speed reading is affected by the wheel diameter - the possibility of choosing
between the wheel diameters in the parameter table.
3. Numeric view:
Three views -
a. Speed (mph / kph). - Resolution - 1kmh / 1mph
b. Distance (miles / km). Resolution - 0.1mile / 0.1km
c. Current time (HH: mm). (The clock will light up)
Switch between modes by pressing the MODE key.
Without automatic switching to default mode.
4. User view:
4.1 Backlight:
The backlight has two activity levels, which are determined by the user
settings.
- Night Light Level - When the headlight signal is active.
LCD