Afikim Afi-lite Plus, Руководство пользователя

Страница: 28 / 39

Afi-lite User Manual P/N 9040310
22
Acid Wash
Do this acid wash once a week, or more frequently, where necessary. This acid
wash is not in place of the daily cleaning routine. (There are some cleaning
solutions available that remove both milk residues and hard water salts.)
1. Rinse the detergent solution out of the system with cold water.
2. Circulating with phosphoric and/or sulfuric acid.
Use hot water and a chemical additive:
•
Entry water: 70°C [158°F], minimum,
•
Returning water: 50°C [122°F], minimum,
Circulate the solution for 10 – 12 minutes and drain.
3. Rinse the system with cold water.
Operation in Cleaning Mode
An automatic delay schedule prevents excessive load on the power supply.
During Cleaning Mode, valves are pulled up and the milk chamber is emptied.
The automatic delay schedule desynchronizes the pulling up of the valves
thereby preventing excessive load on the power supply.
The schedule creates a delay of 100 msec between stalls and is set according to
milking point numbers. Every seventh milking point has the same delay time.
In a 12 station parlor, this results in the following operation pattern:
•
The valves of stalls 1 and 7 are pulled up first.
•
The valves of stalls 2 and 8 are pulled up after a 100 msec delay.
•
The valves of stalls 3 and 9 are pulled up after a 200 msec delay.
•
Etc.
The delay is counted from the time the cleaning mode is activated. Synchronize
the parlor in cleaning mode by setting all milk meters in cleaning mode and
switching the power to the parlor off and on again.
Cleaning Exterior Surfaces
To clean exterior surfaces of milk meter bodies and control boxes, moisten a
soft cloth with water and
gently rub the surfaces.
WARNINGS: 1. Detergents are destructive. Do not use any kind of detergent on
either the control panel or on the milk meter body.
2. Do not direct jets of water on the Afi-lite milk meter control box.