4
VIDEO OUTPUT CONNECTIONS
The video output connections are made via BNC connectors on the back of the unit. The 75
video
outputs can be looped through typical baseband video inputs of switchers, recorders and other
equipment as required. For proper operation, the outputs must be terminated with 75
. For optimum
performance the video cables should be the shortest length of coax practical.
ATA INPUT / OUTPUT CONNECTIONS
Data input and output connections are made via a terminal block on the back of the unit. Follow the
drawings below for proper orientation of input and output connections. Please note that the far left pin
on each connection drawing corresponds with the far left pin on the terminal block. For example,
RS485 DATA IN + is pin 1 as shown in the drawing above.