B
ATTERY
W
ARNING
I
NFORMATION
• Batteries must never be thrown into a fire or incinerated.
• The cells must not be immersed in liquids, such as water, sea water, or beverages. Contact with
liquids must be avoided.
• Individual cells and batteries are not toys and must be kept away from young children and babies.
• Batteries must not be placed in a microwave or subjected to pressure. They may combust, resulting
in smoke and fire.
• Battery packs must not be subjected to mechanical impact.
• Never dismantle a battery pack, as this may cause internal short-circuits, resulting in gas emissions,
fire and explosion, or other problems.
• The electrolytes and electrolyte vapors contained in lithium polymer batteries are harmful to humans.
Avoid direct contact with electrolytes. If, however, electrolytes come in contact with the skin, eyes, or
other parts of the body, immediately flush or rinse with fresh water and seek medical attention as soon
as possible.
• To avoid total discharge, always switch off the vest after use.
• Always charge batteries in good time, but avoid overcharging.
• Store batteries on a non-combustible, heat resistant, and non-conductive surface.
• Lithium Polymer batteries that are totally discharged are defective and must no longer be used.
• Do not expose the battery pack to direct sunlight.
• The maximum permissible ambient temperature of the battery pack is 122 F degrees.
S
TARTING IN
D/C M
ODE WITH THE
D/C A
DAPTER
U
NIT
(RP-8002)
• Connect the supplied adapter lead to the connection cable in the vest.
• Plug the figure-8 power cable of the power supply unit into the socket and into the D/C adapter brick.
• The flashing LED light on the hand-held controller indicates that the vest is ready for use.
• Now, select your program - DRAINAGE, PERCUSSION, OR VIBRATION. The vest will start to work
about 1.5 seconds after selecting the program.
• You can now freely choose the PROGRAM and INTENSITY functions.
T
ECHNOLOGY AND
D
ESIGN
• The safety aspect was of paramount importance in the design of the product. Consequently, the vest
is equipped with the following safety features:
▬The air compressor modules are operated with safe, low voltages
▬Protective fuse in the event of defective or malfunctioning motors
▬The vest operates on a timer of roughly 8 minutes
▬The vest can be operated from either a battery or wall plug
• A microprocessor control, with which input commands are assigned to the respective function via the
membrane keypad, is at the core of the AffloVest.
Содержание RP8001
Страница 1: ......
