aFe Power 52-10002D, Инструкция по эксплуатации

Страница: 4 / 20

Page 4
Refer to Figure A for Steps 1-5
Step 1: Using an 8mm nut driver, loosen the two clamps 1 at the throttle body and factory filter housing.
Step 2: Disconnect the temperature sensor wire harness 2 .
Step 3: Using a 10mm deep socket and driver, remove the nut 3 securing the factory intake tube to the
valve cover and set aside.
Step 4: Disconnect the quick connect fitting 4 on the back side of the factory intake tube.
Step 5: Remove the factory intake tube from the vehicle.
REMOVAL
Figure A
1
1
2
3
4