aFe Power 52-10002D, Инструкция по эксплуатации

Страница: 12 / 20

Page 12
Refer to Figure I for Step 15-17
Step 15: Install your aFe POWER air intake tube 13 by sliding the remaining clamp over coupler on the
throttle body, then inserting the tube end into the coupler and rotating it down counterclockwise into the
filter flange. Tighten all clamps using an 8mm nut driver.
Step 16: Secure the silicone hose installed in step #12 14 to your aFe POWER intake tube.
Step 17: Reconnect the air temperature sensor wire harness 15 to the sensor installed in the intake tube.
INSTALL
Figure I
13
14
15