Afag SE20, Руководство по сборке и эксплуатации

Страница: 12 / 56

Safety instructions
12 – 56 Assembly instructions EN

SE20 - SE30

Date 06.09.2021

Version 2.0
2.6 Personal protective equipment (PPE)
The personal protective equipment serves to protect the personnel from hazards
affecting their safety and health at work.
When working on/with the rotational axis, the personnel must wear the personal
protective equipment assigned by the safety officer of the operating company or
as required by safety regulations. In addition, the personnel are required to:

wear the personal protective equipment provided by the operating company
(employer),

check the personal protective equipment for proper condition, and

immediately notify the person responsible on site of any defects found on the
personal protective equipment.
Personal protective equipment and the respective mandatory signs:
Protective clothing
is a close-fitting clothing specifically
designed to protect personnel from hazards during work.
Protective gloves are specifically designed to protect the
personnel against hand injuries (such as cuts, abrasion,
burns).
Safety shoes are specifically designed to protect the
personnel against foot injuries from crushing, falling objects or
slipping on slippery surfaces.
Hearing protectors are required to protect the personnel
against excessive noise levels to prevent noise-induced
hearing loss.
2.7 Changes and modifications
No changes may be made to the rotational axis which have not been described
in these assembly instructions or approved in writing by Afag.
Afag accepts no liability for unauthorised changes or improper assembly,
installation, commissioning, maintenance, or repair work.
The rotational axis may not be changed or modified in any way, except with
the prior written consent of Afag.