Afag SA-1 Series, Руководство пользователя, Страница: 3 / 40

SA-1-OI-vers. 2.2 gb.23.07.14
Table of contents:
1.0.0 Declaration Incorporation Side 6
1.1.0 Declaration of Incorporation according the Machinery Directive
2006/42/EG Side 6
2.0.0 Module Information Side 7
2.1.0 Transport and storage (packing and unpacking) Side 7
2.1.1 Fastening the module Side 8
2.1.2 Hole spacing and centering bushings Side 9
2.1.3 Tightening torque for screw Side 10
2.1.4 Slide unit load factors Side 11
2.1.5 Module description Side 12
2.1.6 Description module SA-1 Side 13
2.1.7 Description motor arrangement Side 14
2.1.8 Preferred combinations for SA-1 Side 15
2.1.9 Installation for SA spindle axis in a system Side 16
2.2.0 Motor control Interface for spindle axis Side 17
2.2.1 Afag standard controller for spindle axis Side 18
2.2.2 SE-24 Side 19
2.2.3 SE-48 Side 20
2.2.4 SE-Power Side 21
2.2.5 Servo controller Side 22
2.2.6 Programming for the SA spindle extension Side 23
2.2.7 Power fallure during installation and set-up Side 24
2.2.8 Noise emissions Side 25
2.2.9 Protective device at the assembly system Side 25
3.0.0 Montage Instructions Side 26
3.1.1 Manufacturer address Side 26
3.1.2 These operating instructions apply to Side 27
3.1.3 General Description for SA-1 Side 28
3.1.4 Safety note Side 28
3.1.5 Scope of supply/ Intend use/ Safety note Side 29
3.1.6 Warranty Side 30
3.1.7 Dimension for SA-1 Side 31
3.1.8 Technical data Side 32