Afag SA-1 Series, Руководство пользователя, Страница: 28 / 40

SA-1-OI-vers. 2.2 gb.23.07.14
3.1.4 Scope of supply
Item Qantity Description
1
2
1
2
Module
Centering bushings Ø 5x2.5 mm
3 2 Centering bushings Ø 7x3 mm
Designated Use
The series of telescope spindle axis modules SA-3
– SA-6 is used for the linear,
smooth movement of rigidly mounted loads in non-explosion hazardous ambient and
Installation conditions that are specified for this module see Technical Data Sheet.
The module can be mounted in any possible position.
Safety Instructions
These Montage Instructions should be read carefully before carrying out any activity
on or with the module.
The module may only be used in accordance with the intended purpose.
Modifications on the module that are not described in these Montage Instructions or
have not been approved in writing by Afag automation are not permitted. In case of
inexpert changes or improper assembly, installation, operation, maintenance or
repairs, Afag rejects all liability.
CAUTION
The voltages and currents applied may cause personal injuries
and damage to property.
28