AEVI Albert / MTPT10, Руководство пользователя

Страница: 28 / 64

User Manual Albert / MTPT10
USER MANUAL P
A G E
| 28
7.3 Initial configuration
All values have to be set up manually by the user (merchant) or technician. The minimal terminal
configuration requires set up of the following:

WiFi and/or 3G connections

If required by your configuration, set up Terminal and Merchant ID

If required by your configuration, set up of one or more passwords
It might be necessary first to insert the SIM (follow your acquirer’s instructions).
Follow your acquirer’s instructions on any other first time set up activities that are required. These
could include first-time logging in to the acquirer’s remote systems, as advised by the acquirer.
7.4 Normal Power-up
After the first time power up, subsequent power-ups will enable the device to complete
transactions immediately. You don’t need to complete any other configurations, unless the
terminal requires uninstallation or reinstallation.
The procedure for a power up is as follows:

Press and hold down the power button for about 4 seconds, until the MSR LED (on the
top-left yellow corner) turns on, at which point the power button should be released. If
the device was charging while OFF, the MSR LED light would already be a solid yellow
and in this case, the power button should be released after the MSR LED has turned
briefly off and back on again.

Until the AEVI logo appears, the MSR LED remains solid with the screen switched Off.

When the AEVI logo appears, the MSR LED remains solid.

After some time, the AEVI logo is replaced by an acquirer
or customer-specific logo.
7.5 Power down
There are three forms of Powering Down the device: correct procedure, forced and automatic.