AEVI Albert / MTPT10, Руководство пользователя

Страница: 27 / 64

User Manual Albert / MTPT10
USER MANUAL P
A G E
| 27
7.2 First Time Power Up
Before starting the system, charge the battery pack for at least three hours.

Insert the DC jack of the power pack into the payment
terminal.

Plug the AC power cable into the power pack and the other end into a wall outlet (see
arrows).

When the terminal has power, you can switch on the system.

To switch Albert /MTPT10 ON, press and hold down the power button for about 4
seconds, until the MSR LED (on the top-left yellow corner) turns on, at which point the
power button should be released. If the device was charging while OFF, the MSR LED
would already be a solid yellow and in this case, the power button should be released
after the MSR LED has turned briefly off and back on again. After the initial start-up, the
device must be set up using the correct configuration, which will enable transactions to
be processed: please refer to the documentation supplied by your acquirer.