AEVI Albert / MTPT10, Руководство пользователя

Страница: 25 / 64

User Manual Albert / MTPT10
USER MANUAL P
A G E
| 25
7 Power Up and Power Down
7.1 Summary
The device has three main states:
ON Device is powered up and the screen is on. The Merchant LED is on (either
constantly or intermittently, depending on the App that is being used).
OFF Device has been switched off (it could be re-charging at the same time).
The Merchant LED is off.
ASLEEP Device is powered up but the screen is off.
Depending on how the Device is configured, the Device could be fully
asleep (screen off, CPU idle) or only partially (screen off, CPU on); and the
Device may, or may not, be locked. When fully asleep, the battery drains
more slowly.
You can tell if the Device is fully, rather than partially, asleep, by looking at
the Merchant LED. If the LED is mostly off, with just a short flash every few
seconds, this indicates that the Device is fully asleep.
When the device is ON :

Switch it OFF by pressing the power button for a second and answering OK at the on-
screen prompt that appears.

Alternatively, you can switch it OFF by holding the power button for approximately 6 to
10 seconds. This is a forced power-down and you should only do this if the method
described above is not possible.

You can also forcibly reboot the Albert /MTPT10 by holding both the Power Button and
Merchant Button, for about 4 seconds. This should only be done if a system exception
prevents the two methods of switching OFF that are described above.

After a period of inactivity, the Albert /MTPT10 may put itself to SLEEP (partially or
fully, depending on the Device configuration).

You can put the device to SLEEP yourself by pressing the power button once (<1s). The
Device will be partially or fully ASLEEP, depending on how it is configured.