ROBOTAPE 50 ME - LH
Table: technical characteristics of the machine
Description
50 ME - LH
Forward speed
22
m/min.
Net weight of standard
machine
(with 2 T50 - LH)
160 kg
Supply voltage
230V 1Ph 50Hz + T
Installed power
2 x 0,18 kW
Conveyor belts height
30 mm
Ambient operating
temperature
0÷40 °C
Protection grade
Electrical wiring
IP54
Protection grade
Electric motors
IP 23
3.7. NOISE LEVEL
The noise levels were measured in compliance with the:
- ISO 4871
- ISO 11201
standards.
|
Important
The noise level can vary according to the type of adhesive tape used.
Table: Noise level.
Description
Lm
dB (A)
Lw
dBw (A)
Lw
mW (A)
Lop
dB (A)
Empty operation
47.0
63.0
0.00
52.7
Functioning in working
conditions.
67.9
83.8
0.24
75.3
Lm -
Average level of pressure on the measurement surface.
Lw -
Acoustic power output.
Lop -
Level at the operator's place.
i
Caution - Warning
Prolonged exposure over
80 dB (A)
may cause health problems. The use of appropriate protection systems is
recommended (headphones, ear plugs, etc.).
3.8. INSTALLATION ENVIRONMENT CHARACTERISTICS
Careful consideration must be given to the place where the machine is to be installed, in order to ensure that
it may be easily operated, without creating any unnecessary risks for personnel. Therefore we suggest the
following prerequisites.
‒
suitable room temperature (See
3.6.
"technical specifications").
‒
A suitably aired place so that when the machine is working, the degree of humidity is not unpleasantly
high/low from the point of view of the operator.
‒
A sufficient lighting in order that a pleasant, relaxing working environment is created for the operator.
18/43
