AETNAGROUP Robopac INDEX 50, Руководство по эксплуатации и обслуживанию

Страница: 33 / 50

- 29 -
15c011019
R
= =
A
E
E
D
C
B
C
D
B
English
- 29 -
Chapter 5
INforMATIoN oN ADjUSTMENTS
5.2. conVeyor BelT adjusTmenT
Proceed as indicated:
1. Deactivate the main electric switch to put the machine in safety
conditions.
2. remove transmission cover (a) .
3. Loosen nut
(c)
.
4. remove caps (B) .
5. Act on screw
(d)
to adjust belt tension
(e)
.
Important
To check tension, attain to what indicated in the figure.
The resulting shift (r) should be 10÷15 mm.
6. Tighten the nut (c) .
7. repeat the operations described to adjust the other belt.
8.
Refit guard (a) .
9. Put caps on again
(B)
at the end of the operation.
caution
Warning
Before re-starting the machine, check that no tools or other
equipment has been left near the moving parts.