AETA Scoopy+ S, Руководство пользователя

Страница: 114 / 136

108 S
COOPY
+ S - User Manual
You reach the AETA remote html access portal:
1. Select the product type (S
COOPY
+ S) from the drop-down list.
2. Enter the serial number (leading "0" don't care).
3. Enter the codec password.
4. Click the "Login" button.
After a while you get the home page of the codec, almost identical to that you would get with a direct
connection over a LAN:
The difference is in the small bar at the top ("Close remote control session"). Click it when you wish to
disconnect from the server.
Navigating the pages follow the same rules as a direct access through a LAN.

Warning: in this remote control mode, remember that any change on the " R
EMOTE
A
CCESS
" page may
cause you to lose control! In the best case you will need to reconnect to the remote access server, but
the loss may be final if the codec can no longer reset its connection to the server. In such case a local
intervention on the unit would be needed.