AES 603 FB, Инструкция по установке и эксплуатации, Страница: 10 / 12

P a g e | 10
Testing
Press the call button on the intercom and all coded handsets should ring (max 4 handsets).
Answer the call on any handset by pressing
,
and check for good 2 way speech. Adjust
volume while on a call with up and down arrow buttons on the handset and press the same button
again to end the call. The gate/door release button can be pressed at any time, either while on or
off a call. The relay on the transmitter should then pulse on for 4 seconds.
Using the intercom Handset
Adjusting time on Handset
Press MENU for more than 2 seconds, and then use up and down arrow keys to set hour. Press
MENU again to cycle to minutes and adjust. Press MENU once more to end the process.
Maintenance of the Intercom
The stainless steel can dull or discolour over time in weather conditions or in winter if exposed to
road salt. This can be polished with a suitable stainless steel cleaner or re-brushed with an
abrasive pad or sand paper, observing the directionality of the grain.. Take care when cleaning
the acrylic face. This should be gently wiped with a soft damp cloth to prevent scratching.
Calling
…..
MENU
12.21
MENU
12.21
MENU
12.21
MENU
12.21
MENU
12.21
Answer /
end call
Open
door / gate
Internal call
another handset
Up and down arrows
increase / decrease ring
and speech volume
Change
ring tone
Select or enter