AES global Cellcom Prime 5AB, Руководство пользователя

Страница: 6 / 28

P a g e | 6
Output Connections Example
This example shows relay 1 connected to a gate motor controller for vehicle gates, and output 2
connected to a magnetic lock for a door or pedestrian gate.
Powering Up
Perform a final check of wiring and ensure the antenna is connected before switching on the
power. Once the power is switched on, the power LED should illuminate.
Power LED
CPU LED
GSM LED
Searching
1 bar signal
2 bars signal
3 bars signal
4 bars signal
System booted
Booting
TIPS:
My GSM LED is still searching…
-Check the SIM card is registered and can make a
call in a phone.
-Check the SIM card is seated correctly. Power off,
clean the contacts on the SIM and the GSM unit,
and reinsert the SIM.
-Check power cable distance and thickness.
-Increase antenna height.
-Change network.
-Move antenna away from metal objects or
overhanging shrubs.
-Fit a high gain antenna.
C
OM
N
/O
C
OM
N
/C
Relay 1 Relay 2
(not supplied)12v dc
+
-
Other device
e.g. exit switch
Magnetic lock
Gate controller
COM
Start
Electric Gates