AES global Cellcom Prime 5AB, Руководство пользователя

Страница: 25 / 28

P a g e | 25
9999 # 73 * # Delete all caller ID numbers N/A
Service & diagnostic messages (no passcode required for some of these!)
* 20 # Check reception level 1-31 (no passcode needed) N/A
* 21 #
Check stored numbers. O = dial out number. I = dial in
number. E = end of message. (no passcode needed)
N/A
* 22 # Check input status and relay status. (No passcode needed) N/A
* 23 # Sends SMS messages of the last 20 events. N/A
1234 # 25 # Check stored keypad codes. N/A
Keypad Programming
9999 #
81X code # time #
Permanent codes - X=1 or 2 for relay 1 or 2. Code = 4-6
digits. Time = 1-9999 seconds, or 0 for latching code.
N/A
9999 #
83 # day,day,day
# time1,time2 #
code #
Time restricted codes
Day = day of the week e.g. mon,tue,wed,thur,fri.
Time1 = start time. Time2 = end time (24 hr format, no colon.
E.g. 11:30pm = 2330. 8.30am = 0830.
Code = pin code 4-6 digits.
N/A
9999 #
82 # hours #
code #
Temporary codes
Hours = time to expire in hours (1-168 hours).
Code = Pin code 4-6 digit code. N/A
9999 # 84 code # Delete code
– Code=known code to be deleted.
N/A
9999 # 84 * # Delete all codes. N/A
Notifications
9999 # 80 X # X=1 to disable. X=2 to enable. N/A
9999 # 78 XXX # X=phone number to send notifications to. (*=delete number) N/A
9999 # 79 text # X=text to send to the receiving
phone e.g. “gate opened”
N/A
Automatic Time Clock Trigger Times
1234 # X #
day,day,day #
time #
X=1,2.3 (trigger, latch, unlatch relay 1) 4,5,6 (relay 2)
Day = days of the week (mon,tue,wed,thur,fri,sat,sun)
Time = time of day (24 hr format, no colon. E.g. 8:30am =
0830)
N/A
1234 * X # Delete ALL automatic trigger times. N/A
Clock Sync - Auto Time Calibration after Power Fail
9999 # 86 XXX # X=telephone number of SIM inside the intercom. N/A
9999 # 86 * # Delete the phone number. N/A
Summer Daylight Auto Correct
9999 # 87 ?? #
?? = number of days between SMS calibration SMS should
be sent. 0 = no message sending.
N/A
Do Not Disturb (push button de-activated during set times)
1234 # 21 # ON # ON = activated. OFF = de-activated. OFF
9999 #
21 # day,day,day
# time1,time2 #
Enter all active days during which button should operate.
Enter start and end time button should operate
(24 hr format, no colon. E.G 8:30am = 0830)
N/A