40-7705ii-UM
Page 69
Rev 1 June 11, 2018
To manually enter a route to the subscriber unit, select the Manual Path
Entry and fill out the manual routing screen as instructed below. Where
the first to go thru is the ID of the IP-Link.
Figure 11-5 Manual Routing Table
Once you have entered your communications route, click OK to send the
message to your subscriber unit using the route entered.
11.5
The Message Function Group:
Figure 11-6 Message Pull Down Menu
To access the Message function menu group, hold down the
<Alt>
key
and Press
<M>
or click on Message in the menu bar. The pop-up
illustrated above will appear. Use the arrow keys to highlight a message
function and press
<Enter>
to select it. Proceed by selecting your target
unit and choosing a route of communication.
