Aerus Pure & Dry, Руководство пользователя

Страница: 5 / 20

5
Humidity Set
Automatic
Timer
ON/OFF
Switch
Cleaning
Mode
Night
Mode
Louver
Mode
Display Screen Safety Lock
Mode
%
M
WARNING: This appliance must be grounded and should only be connected to a ground
110 - 1120V / 60Hz main supply. The installation must be in accordance with
the regulations of the country where the unit is used.
• This unit is designed to operate between 41 ° F and 90 °F. The optimal operating
temperature range is between 60
°
F and 90°F. The humidity level can be set within a range
of 40% RH (Relative Humidity) to 70% RH.
Typically when the room temperature is less than 59° F, humidity levels are low. When
humidity levels are low in the room the LOW TEMPERATURE icon will light up. The LOW
TEMPERATURE icon will flash if room temperature falls between 35° F and 58° F. The
dehumidifier should not be used when the LOW TEMPERATURE icon is flashing.
• In the event of a power outage, the unit will restart at the previously set function mode and
setting when power is restored.
OPERATING THE DEHUMIDIFIER
!
CONTROL PANEL
The Control Panel consists of:
a) 8 control buttons and
b) Display Screen
With these, you control the function of your Aerus Pure & Dry Dehumidifier.
As long as the dehumidifier is plugged in to a 120V outlet, four items will always be displayed
in the Display Screen: Relative Humidity, Temperature, HEPA filter (installed or not), and HEPA
Filter Timer.
When the dehumidifier is turned ON, icons are displayed that show the current operating
mode.
NOTE: When the dehumidifier is turned ON, the Control Panel briefly illuminates.