Aerus Origins WC400, Руководство по эксплуатации

Страница: 21 / 64

21
Level IV Viewing History - H Values
Historical information can be viewed by pressing the SET and DOWN buttons simultaneously with the Analyzer control in the home
position. Release both buttons when the control displays an “H” value. Press the UP or DOWN buttons to navigate to each setting.
H# Description Range Notes
H0 Resin Volume: Cubic Feet Liters
0.25 –3.00
5 - 100
Resin Volume
H1 Days since last regeneration 0 - 255
H2 Average Number of Days Between Regenerations 0 – 99 days Last 4 regenerations
H3 Calendar Adaptive Override Days 0 - 30 days
H4 Number of regenerations since last reset 0 -65536
H5 Total amount of salt used since last reset 0 - 999900 Lbs or Kg
H6 Number of regenerations due to Calendar Override 0 - 65536
H7 Number of Low Salt Alarms since last reset 0 - 65536
H8 Number of Reduced Capacity Alarms since last reset 0 - 65536
H9 Months since unit last serviced 0 - 255
Holding the set key down for three seconds while H4 (number of regenerations since last reset) is being displayed will reset the numbers
stored in H4, H5, H6, H7 and H8. Holding the set key down for three seconds while H9 (months since last serviced) is being displayed will
reset the numbers stored in H4, H5, H6, H7, H8 and H9.
Program Reset
The Analyzer control can be reset to original factory parameters when viewing the H0 parameter. Press and hold the
SET button for three seconds while H0 is displayed. Release the button. All settings except for Time of Day and Day of
Week will be reset. The Analyzer control will now display three dashes indicating that the resin volume must be set.
System Capacities
The Analyzer control software contains the following preloaded system capacities for salt setting
(please see the Performance Data Sheet on page 3 for certified claims):
Salt: Lbs/Ft3 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
Cap KG: 12x48 1.50
21 27 31 35 38 40 43 45 46 48 50 51 52 54 55 56