Aerpro AERA10D, Руководство по установке

Страница: 7 / 24

7
4A
4B
4C
4D
The display can be installed Flat or with a Horizontal Angle towards the driver. For flat mounting,
attach the Clamp Assembly (1) to the display using M4 X 14 screws
(FIG. A) . If a horizontal angle
is desired, insert the Angle Plate (2) in between the clamp and display and replace 2 of the M4 X
14 screws with longer M4 X 18 screws on the thicker side of the angle plate
(FIG. B) . Center the
bracket on the back of the display as a starting point, and if needed you can adjust up or down.
FIG. A
FIG. B
2
1 1
3
TOP
M4 X 12 (4X)
M4 X 18 (2X)(4X)
M4 X 14 (2X)X)
No Horizontal Angle
With Horizontal Angle
Display Assembly
Multiple Mounting Options
AERA10D can be configured for different mounting applications:
See Aerpro website for TECH TIPS on vehicle specific installations.
Using a Double DIN Dash Kit (PAGE 8)
Using a Double DIN Sub-Dash Kit (PAGE 10)
Using a Double DIN Factory Radio Mounting Brackets (PAGE 12)
Using a Single DIN ISO Mountable Dash Kit, relocating Radio Module (PAGE 14)
Custom Mounting Applications.
TOP
Always ensure TOP indicator on the Clamp Assembly is facing UP.