![background image](http://html.mh-extra.com/html/aeroworks/extra-260-arf-qb/extra-260-arf-qb_assembly-manual_2863261090.webp)
90
3.
Use a hobby knife or small drill to drill the
exit hole for the choke pushrod as shown.
4.
Measure the length of the choke pushrod
required to extend out of the front of the cowl
when the choke control arm is fully pushed aft.
5.
Make a 90º bend at the end of the choke
pushrod as shown.
6.
Reattach the lower cowl with the choke push-
rod extending through the hole. Check for
proper operation of the choke. Ensure the
pushrod does not bind at either choke on or
choke off position.