9
1.
The ailerons have been pre-hinged and glued
to the wing panels and are ready for flight. No
other steps are necessary for hinging. Gather
one wing panel, one aileron servo, and one 18”
servo extension as shown below for servo in-
stallation.
WING ASSEMBLY
2.
Layout the servo and extension on the wing to
test fit the installation and ensure servo exten-
sion is the correct length.
3.
Attach the 18” extension to the servo lead and
secure with safety wire, string, tape, or other
method. Ensure the plugs will not come apart
from vibration or light tension.
4.
Fasten the pull string from the servo hole to
the male plug of the servo extension. Secure
with tape so that the strings pulls from the
front end of the plug
. Taper the tape to
avoid hang-ups inside the wing.
