46
4.
Dry fit the header and canister to the bottom of
the fuse and ensure there is one inch of space
from the line just marked to the rear of the
canister.
5.
Draw a line across the fuse belly on the mark
location as shown. This will be the location of
the rear former of the canister tunnel.
6.
Use a hobby knife to remove the covering
from the rear of the landing gear cross brace to
the mark between the two bottom fuse string-
ers.
7.
Use a hobby knife to remove the covering
from the front former to the front of the land-
ing gear cross brace as shown.
