24
19. Cut off excess cable as shown
20. A drop of thin CA may be applied to the swage
tube to help secure the cable.
21. Attach ball links to the rudder servo arm and
then attach the servo arm to the rudder servo as
shown.
Note:
Use flat washers to prevent link from
coming loose from the brass ball
22. Plug the rudder servo into the rudder channel of
the receiver and power up. Turn on transmitter
to center rudder servo. Ensure servo trim and
sub trims are centered.
Note:
On metal geared servos use blue Loctite for
all Servo arm mounting screws.